Features

• Checks continuity and polarity
• 1/4" TRS and XLR in/out
• Tests speakers, mics, cables and wireless systems
• Tests mixers and signal processors for polarity inversions
• Internal speaker for testing mic polarity
• Internal mic for testing speakers
• High-level output for testing miles of cable
• Battery test on
• receive module saves troubleshooting time

Cricket Send Pulse Generator

• Pulse Waveform Polarity: positive-going balanced line
• output pulse, switch selectable for hi or low level balanced
• signal with positive pressure produced at the tip of 1/4-inch
• jack and pin #2 of XLR jack.
• Speaker Output Pulse: Accepts 2 ohm (or greater) load with
• positive pressure produced at the tip of a 1/4-inch speaker
• jack and positive terminal of an internal speaker.
• Dimensions: 3.33"W x 1.75"H x 5.25"L
• Weight (with battery): 1.10 lbs. (.5 kg.)
• Battery: 9 volt, alkaline only (battery included)

Cricket Recieve Pulse Detector

• LED Indicators:
• Green: indicates positive-going pulse polarity with power
• switch in "ON" position and battery status with power switch
• in "BAT" position.
• Red: indicates negative-going pulse polarity.
• Detection inputs: one 1/4-inch, balanced; one XLR, balanced.
• Mic Sensitivity: -64 dB, +3 dB
• Weight (with battery): 1.02 lbs. (.46 kg.)
• Battery: 9 volt, alkaline only (battery included)
• Switches: Internal microphone for testing speaker output.
• Polarity/Continuity Test: Female XLR pin 2,3,1 continuity;
• 1/4-inch jacks: tip, ring, sleeve continuity.
• Test set shipping weight: 3 lbs. (1.36 kg.)