Main Feature

- Switchable range between +/-6dB and +/-12dB

- Balanced input and output

- XLR and 1/4" TRS connector

- Input gain range -12dB/+12dB

- 12dB/octave 50Hz low cut filter

- Front panel bypass switch

Input

Connector 1/4" TRS, female XLR (pin 2 hot)

Type Electronically balanced/unbalanced, RF filtered

Impedance Balanced 40KΩ, unbalanced 20KΩ

Max Input Level > +21dBu balanced or unbalanced

CMRR > 40dB, typically > 55dB at 1KHz

Output

Connector 1/4" TRS, male XLR (pin 2 hot)

Type Impedance balanced/unbalanced, RF filtered

Impedance Balanced 100Ω, unbalanced 50Ω

Max Output Level > +21dBu balanced/unbalanced into 2KΩ or greater

  > +18dBm balanced/unbalanced (into 600Ω)

System Performance

Bandwidth 20Hz to 20KHz, +0.5/-1dB

Frequency Response < 10Hz to > 50KHz, +0.5/-3dB

Dynamic Range 108dB

Signal to Noise 90dB

THD+Noise < 0.004%

Interchannel Crosstalk < -80dB, 20Hz to 20KHz

Function Switch

EQ Bypass Bypass the graphic equalizer section in the signal path

Low Cut (recessed) Activate the 50Hz 12dB/octave high pass filter

Range (recessed) Select either +/-6dB or +/-12dB slider boost/cut range

Power Supply

Operating Voltage 230VAC 50/60Hz

Power Consumption 12 Watts

Main Connection IEC receptacle

Physical

Dimension [HxWxD] 1.75" x 19" x 6" (4.4 x 48.3 x 17.5 cm.)

Weight 4.7 lbs.